59.1' Bieritz Germany Gaff cutter 59

Year	Length	Beam	Draft	Location	Price
1937	59.1'	13.1'	5.9'	Outside United States	$123,000

Description:

Vessel details: A 1937 wooden Gaff Cutter - Formerly a North Sea Shrimper Length: 59 ft - 17.98 meters LWL: Beam: 13ft. - 3.96 meters Draft: 3ft. - 0.91 meters Displacement: 41.70. Designer: Bieritz. Builder: Bieritz. Year: 1937 Hull: Oak planks on Oak Frames Documented No: 009579 Engine: Deutz S/F6M716; Engine Number - 4748421 This Yacht is in good condition.Wooden hull is 45mm Oak planks on heavy Oak frames fastened with double hot-dipped galvanized nails. As noted above some oak planks have been replaced with mahogany planks. Concrete ballast is built in on either side of keel. The steel rudder has hydraulic steering. Deck is Pitch Pine and mast and spars are Douglas fir. The aft deck is beneath a wooden roof, upon which 9 solar panels are mounted

Equipment:

Forward of this is an engine room with Deutz 150 hp engine. Further forward, there is a large Teak table seating 8.Engine: Engine is installed behind main cabin with access from above. • Deutz 150hp kw110, installed 1978: Engine no. is 4748421; engine model no: S/F6M716. No engine hour meter. Transmission is hydraulic to a large 3 blade propeller. • 3 Stainless Steel tanks holding 820 litres of diesel. • 2 stainless steel water tanks holding 490 litres of water. • Waste water tank 350 litres. • 39 Kg Buegel anchor and 100 meters 10mm galvanized chain. • 69lbs CQR with 100mm chain 10mm plus 100meters 22mm Roblon Rode. • 25 kg Fisherman with 100 meters 22mm Roblon Rode • S.S.B. Icom710M Radio and Pactor for emails and weather reports. • Simrad-Robertson autopilot • MLR- GPS • Uniden Depth Sounder. • Dantronik RT 2000 VHF • ICOM hand held VHF. Water maker: Pur 5.7 lph

Location: Panama, Outside United States

L34674

34 635 059935 Contact Seller

Material	Hull	Type	Rigging	Cabins	Condition
wood	monohull	motorsailer	cutter	2	good