Equipment: |
SOLO 2017 & 2018 UPGRADES:
Keel ground to iron in weak spots, built out & faired with West Epoxy Systems (2017) Bottom & keel, old paint removed & 2 coats epoxy barrier & 2 coats of VC-17 applied (2017) VC-17 applied (2018) Hull wet sanded 600-1200 grit & 3 coats wax applied (2017) All Standing rigging replaced NEW-2017 Rigging professionally tuned (2018) Main, Jib & spinnaker halyards replaced NEW-2017 Jib sheets NEW-2017 Traveler lines NEW 2017 Reefing lines NEW-2017 Boom-vang NEW-2017 Cunningham NEW-2017 Lazy Jacks NEW-2017 Motor lift lines NEW-2017 Lifelines replaced NEW-2017 2 Taylor Made 10/26 Fenders Taylor Made Lifeline Cushions NEW-2017 Navigation lights, bow, stern & mast replaced NEW-2017 Davis Windex & Light NEW-2017 2-Federated Deep Cycle Batteries NEW-2017 Marinco Shore Power 30 Amp Main & jib sails refurbished by Sail Care (2017) All teak & hatches sanded and 3 coats of Cetol Light applied (2018) 4 15 to 25 dock lines Harken roller furling system NEW-2017 Raymarine i50/i60 Depth, Speed, Wind Instruments NEW-2017 Tiller Autopilot NEW-2017 Ronstan Carbon Battlestick Tiller Extension NEW-2017 Jabsco Twist n Lock Compact Toilet NEW-2017 Richie Venture SR-2 Bulkhead Compass NEW-2017 VHH Marine Radio Stereo and speaker system NEW-2017 Salon wood surfaces sanded, stained & varnished (2017) Salon cushions professionally cleaned and Scotch-guarded (2017) 13# Anchor, Rode & Chain Type IV cushion throwable NEW-2017 USCG approved safety gear NEW-2017 Pop Top Power Lift Kit, allows Pop Top to be lifted with one hand NEW-2017 Pop Top Cover with windows, allows Top Pop to be up in heavy rain and wind 4 Spinlock rope clutches NEW-2017 All fresh water and toilet hoses NEW-2017 Microwave Oven NEW-2017 Lewmar winches professionally serviced (2017) Evinrude 9.9hp outboard motor tune up and new water pump (2017) Galley cabinets sanded, stained and varnished (2017) Heavy Duty Winter Cover, keeps boat free of snow & rain NEW-2017 Evinrude 9.9hp, new carburetor bump to 15hp NEW-2018 Add 4-Blade High Thrust Prop NEW-2018 Add outboard remote shifter & ignition switch to cockpit NEW-2018 New carburetor, high thrust prop, remote shifter & ignition switch installed at a cost of $1,075 NEW-2018
REDUCED FROM $12,000 TO $11,000 on 07/01/2018
LOCATED 30 MILES EAST OF CLEVELAND ON LAKE ERIE
Additional photos available |