20'
Hutchins
ComPac 19 Mk III
|
Year
|
Length
|
Beam
|
Draft
|
Location
|
Price
|
|
1989
|
20'
|
7'
|
2'
|
Connecticut
|
$7,800
|
 |
| Description: |
1989 Com-Pac 19, MK III, in excellent condition, located in Branford CT
Length: 20', Beam: 7', Displacement: 2000 lbs.
Draft: 2' shoal draft keel, developed from N.A.S.A. low drag, high lift wing sections.
Ballast: 800 Lbs.
Sail inventory:
Main sail with jiffy reefing system.
155%Genoa and 100% working jib. Each head sail is set up on a CDI roller furling / reefing system.
Outboard Motor:
2004 two cycle 5 Hp Mercury, in like new condition. This motor is serviced every season.
Trailer:
2000 "5 STARR" single axle, with a 2995 Lb. G.V.W.R. capacity. This trailer is galvanized, has been maintained properly and is in excellent condition. |
| Equipment: |
Safety Features:
Self bailing 6' 8" cockpit with high backed seats.
All halyards and control lines lead to the cockpit. No need to leave the cockpit when hoisting or dropping the mainsail. The main can also be reefed while standing in the companionway.
Jib or Genoa head sails are reefed or furled form the cockpit, by simply pulling the CDI control line.
Stainless steel bow pulpit and stern rail with four stanchions and connecting life lines.
Cockpit mounted manual bilge pump and automatic bilge pump. Bilge is always dry as a bone. There are no below the water thru hull fittings.
Factory molded non-skid on all top side surfaces.
Stern mounted stainless steel folding boarding ladder.
Cabin top teak hand rails.
Built-in anchor roller with anchor storage capabilities. Anchor can be launched by simply pulling a stainless steel pin on the roller assembly.
Coast guard approved locking storage compartment for two 3 gallon gas tanks. |
|
Location: Branford, Connecticut
|
|
L9487

|
203-483-8477
|
|
|
 |
|
Material
|
Hull
|
Type
|
Rigging
|
Cabins
|
Condition
|
|
fiberglass
|
monohull
|
cruiser
|
masthead sloop
|
1
|
excellent
|
The URL for this page is
www.sailboatlistings.com/view/9487
Listing Added 08-May-2008
|