SailboatListings.com


1979 Custom cruising cutter Morgan/Irwin located in Massachusetts for sale

45' Custom cruising cutter Morgan/Irwin

Year
Length
Beam
Draft
Location
Price
1979
45'
11'
6.5'
Massachusetts
$45,500

Description: Just returned from 5000nm cruise with two young kids (See Cruising World waypoints article June/July 2019). This is a one off custom cutter rigged cruising yacht with beautiful lines. Designed by the famed Charlie Morgan and built at Irwin. She was outfitted in the Great Lakes. Completed two Caribbean/Eastcoast cruises and several Bermuda trips. Solid fiberglass hull, with a cut away full keel and skeg hung rudder for safety offshore. Newer performance rig with full battened main. Excellent sailing boat. Ready to cruise, many upgrades. Make the dream a reality for an affordable price and turn heads in every anchorage. Lots of gear included. This is a sailors boat, current owner willing to consult.

Equipment: -awlgrip topsides, new bottom paint
- Profurl furlers jib and staysl
- Antal hardware
- well build sails in good condition
- new dyneema running backstays
- new high tech main halyard
- new Sampson xls jib and stay sheets
-2x cqr anchors with 175 5/16 chain
- Vetus tiger windlass
- 1x aluminum fortress anchor and rode
-2x Lewmar 54 self tailing
- 2x Lewmar 44 self tailing
- Spinnaker pole
- monitor windvane with emergency rudder
-406 MHz Epirb
-Revere offshore commander Liferaft current cert.
- New Garmin satellite messenger for offshore comms
- storm sails
- 55hp duetz diesel (air cooled) with paragon gear
-Paul Luke feathering prop
-b and g wind and depth
- 10 Garmin display network with radar and marine weather (subscription required)
- 200W solar with regulator
- new electric panel
- 2x Lifeline AGM batteries GPL4d
- Ample power battery monitor
- 80 gallons water capacity
- 50 gallon fuel capacity
- newer force 10 propane stove with aluminum tank and propane leak alarm
- brand new frigid-boat refrigeration system in huge well insulated box (very low draw)
-cushions in good condition
- winter frame for shrink wrap
- all jack stands included
- 12 roll up hypalon inflatable and 6hp Yamaha possibly included

Location: Cape Ann, Massachusetts
L80103
978-471-9389

Material
Hull
Type
Rigging
Cabins
Condition
fiberglass
monohull
cruiser
cutter
good

Click on any thumbnail below for a larger photograph, or View All Photographs Inline

The URL for this page is www.sailboatlistings.com/view/80103

This Custom cruising cutter Morgan/Irwin Added 28-May-2019



Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image Custom cruising cutter Morgan/Irwin Click to launch Larger Image














 



Show all sailboats for sale under: 15 20 25 30 35 40 45 50 55 60 70 80 (feet LOA) | Multihulls: Catamarans Trimarans