SailboatListings.com


1996 Elliott Marine Elliott 650 located in Rhode Island for sale

21' Elliott Marine Elliott 650

Year
Length
Beam
Draft
Location
Price
1996
21'
8'
4'
Rhode Island
$6,250

Description: 1996 Elliott 6.5
New Zealand built and fun to sail, the Elliott 6.5 is a budget sport boat for those that like to go fast. Fiberglass over strip planking, shes a light air rocket that can also plane downwind hitting speeds in the mid-teens. When well sailed, she can compete with the J80s and J70s of the world.
Vitals
LOA: 6.42m (21 ft)
LWL: 6.0 m (19 8)
Beam: 2.42m (7 11)
Draft: 1.2m (3 11)
Ballast: 500 lbs
Disp: 1477 lbs

Equipment: This 6.5 is set up to sail with a symmetric or asymmetric spinnaker. A fractional rig, she has a full hoist and short hoist.

Sails (Graded A thru f)
Main 1 A- (almost square top)
Main 2 C
Jib 1 B (about a 125%)
Jib 2 B-/C (about a 120%)
Jib 3 C (about 85%)
Sym 1 A (short hoist)
Sym 2 C- (Full Hoist)
Asym 1 B (short hoist)
Asym 2 C (full hoist)

Notes: Jib 1 and Sym 2 are J22 sails. They fit perfectly on the Elliott.

Running rigging: The short hoist currently only has a tracer line. I would put in a good halyard. The jib halyard is OK but I might replace it.

The boat spent the winter in the shop. Items worked on:
Keel & bulb were stripped and faired. New keel/bulb connection bolts. Additional carbon fiber added to strengthen the keel/bulb joint.
Aft toe rails removed. Hull/Deck joint re-fiberglassed up to amidships.
Fresh non-skid amidships and aft (cockpit area).
Additional larger cockpit deck hatches installed providing access to previous inaccessible spaces. Great for gear storage.
New backing plates on aft lifeline stanchions.

Items to do:
1. There is 1 soft spot in the cockpit deck just forward of the tiller. The spot temporarily repaired with two pieces of epoxy penetrated & non-skidded plywood. Plan was to cut the section out and rebuild next winter.
2. Remove the forward toe rail and either re-bed it or not put it back.
3. General refinishing of the cabin overhead. Not critical but a nice to do.
4. Add G10 backing plates to forward stanchions.

Trailer is good shape and road worthy. I used portable lights and would come with the boat.
Boat has a lifting keel. Comes with a heavy duty keel crane. You do not sail with the crane aboard.

Asking $6250 or best reasonable offer.

I would consider a trade for a good J22. Theres a growing J22 fleet at my home club and I would like to get back into one design.

Willing to work with new owner on transportation.

PS: The photo of the boat hanging in the shop is from before the keel work was done. The other shop photos are in process or when complete.

Location: North Kingstown, Rhode Island
L81197
(401) 601-8959

Material
Hull
Type
Rigging
Cabins
Condition
fiberglass
monohull
racer/cruiser
fractional sloop
1
good

Click on any thumbnail below for a larger photograph, or View All Photographs Inline

The URL for this page is www.sailboatlistings.com/view/81197

This Elliott Marine Elliott 650 Added 15-Jul-2019



Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image Elliott Marine Elliott 650 Click to launch Larger Image














 



Show all sailboats for sale under: 15 20 25 30 35 40 45 50 55 60 70 80 (feet LOA) | Multihulls: Catamarans Trimarans