36' Ericson Ericson 36C

A classic Bruce King design, while maintaining a classic look, the underbody is an encapsulated Fin Lead keel in FG. The hull is laminated FG with the look of wooden planks, flush deck, with a sunken Anchor well Forward, and a huge Cockpit aft with high sloped coamings for comfort while sailing or anchored...
These boats have sailed offshore, around the world, and make an excellent liveaboard.
The boat was totally refurbished but due to health I must leave some projects to the next Owner!
Please check out the FB Ad for 20 pictures
https://www.facebook.com/marketplace/item/3142951112537907/?ref=search&referral_code=null&referral_story_type=post&tracking=browse_serp:32fe779a-18cf-42a3-ba7b-87c4f5e17fc5

New Chainplates
New Mast step
Anchor well and Cockpit Teak removed deck core issue remedied and painted
New ray marine instruments Including /Wind
All new plumbing and water filtration system
All thru hulls and seacocks replaced with Marelon
New Dickinson Propane Bulkhead Heater
All new LED Lighting
New Windlass
New anchor Delta
New Chain and Rode
Anchor Locker floor glassed in with overboard drains.
New Cabin Top liner 90% complete in every cabin but the aft one.
New Airhead toilet
Mast removed and all wiring redone
New Steaming deck light
New Windex and MH wind instruments
Spreaders reinforced with carbon fiber and epoxy
30# horizontal propane tank with al new lines, dedicated to the Stove, heater, and BBQ
New single lever Engine controls
New Bimini
New Mizzen and mainsail covers
Some wiring upgraded but more work needed
New Forestay and Uppers
Rebuilt Harken Furling Gear
New Self tailing winch on the mast and 2 new jammers
Walker Bay dinghy....
Cockpit Deck box housing the propane system totally rebuilt and drains over board on it own dedicated thru hull
Very large Ice Box, the New in the box nova Kool plates and compressor need to be installed.
New sink and facet in the Head
New facet in the Galley
Vinyl Faux tile backsplash
Interior Teak in excellent shape
Teak Parquet floor needs some work
Engine has only 200-300 hours and is a Universal 25hp
A new Flex coupling installed between the Transmission coupling and the Shaft coupling
Traditional stuffing box in good shape
A rebuilt 3 Blade Kiwi Prop
The bearings, Pintles and Gudgeons agree in excellent shape and have little play
The Steering system was all upgraded to Spectra Rope
The Uninstalled auto pilot was rebuilt at the California factory
New Compass
New fuel Sender and gauge
Coaming deck drains rerouted to dedicated thru hull drains
The boat sails very well, and when the wind is over 10 Knots TWS you can roll the Genoa up and sail with Main and self tacking staysail
There are some racing sails that need to be modified to fit on the Furler.
There is and excellent Asymmetric Spinnaker with a Sock!
I'm sure there is more....
Herr is a link to a recently sold Ericsoon36C in Toronto, it perfect shape!
https://yachtr.com/36-ericson-1977-2821788/