38' downeast 38 Cutter
Year
|
Length
|
Beam
|
Draft
|
Location
|
Price
|
1976
|
38'
|
11.5'
|
5'
|
North Carolina
|
$44,900
|
 |
Description: |
View on Yachtworld which includes a video.
NEREUS is a fine example of a Down East 38. She has proven herself to be a sea kindly, comfortable, and safe cruising boat. She is beamy and spacious. Living aboard, whether offshore sailing, at a mooring, or dockside, she is perfect for solo sailing, a couple, or a small family.
Highlights of the most recent refit and modifications are listed below.
Most Recent Refit (2018)
New Chainplates installed outboard New Teak Toerail New Bow Sprit (fir with teak platform) Hull Painted (System Three in 2015) Deck and all Spars Painted (Awlcraft 2000 in 2018) All Hardware Rebedded (Compass Marine Butyl Tape) New 3/8 Acrylic Windows in main salon Stanchion bases modified to 4 Bolt (see photos) New Dodger with side curtains and Bimini
Other Modifications
Aft Ice box replaced with refrigerated box using 4in urethane foam and Adler Barbour Coldmachine - water and fan cooled condenser (will make ice) V Berth mattress is 6in Latex Foam Headliner vinyl replaced with removable wood panels and teak trim. Galley surfaces and chart table are all white Formica. All Lighting is LED including Nav Lights 35 Gal holding tank, Tank Full Sensor, rigid PVC plumbing for NO odors. Macerator Pump for overboard discharge (where allowed) 10000 BTU Propane Bulkhead Mounted Heater Red Dot Auxiliary Heater (Engine Coolant) Solar Panels (2) 85 Watt each with Renogy solar charge controller |
Equipment: |
Galley
Adler Barbour Coldmachine - water and fan cooled condenser (will make ice) installed in a customized design next to the stove for easier access than the original design Kenyon Kenstar LPG 3-burner stove with oven, gimbaled Double stainless steel sink with hot and cold pressure water, and a manual pump Storage cabinets above the countertop Drawers below the countertop Cutting board Easy care formica countertops
Head
Stainless steel sink with pull out shower Storage cabinets above and under the sink Shower curtain Mirror Manual marine head Overhead hatch Opening portal Shower drains to a dedicated sump pump
Electronics
Furuno Radar Garmin VHF with GPS Yaesu FT-840 Ham Radio with SGC Auto Tuner Navico 5000 AutoPilot (2) Depth Sounder (2)
Electrical
2 Group 31 AGM Deep Cycle House Batteries (6/21) 1 Group 27 Starting Battery (7/23) Renogy 1000W Inverter NOCO Genius 4 Bank 10A/Bank Charger Wind Generator Two 100W Solar Panels with Renogy Solar Charge Controller
Mechanical
Yanmar 3HM35F - 3cyl 30hp fresh water cooled diesel, 2400 hours Additional crankshaft pulley installed to drive alternator Amptech 100A alternator with Sterling Pro Digital Smart Regulator 6 Gal Day Tank 6Gal Water Heater AC/Engine Coolant
Deck and Hull
Primary anchor 44lb Bruce on 60ft chain and 200ft 3/4in rope. Secondary anchor 22lb Danforth on 30ft chain and 100ft 3/4in rope Stern anchor 20lb Danforth style on 20ft chain and 75ft 1/2in rope. (estimated lengths) Custom covers for Bowsprit, Toe Rail, Hand Rails, Companionway doors and Turtle
Rigging and Sails
Full Battened Main - Very Good Condition on the Strong Luff Track and Slide Assembly Staysail - Like New on Profurl Roller Furling Yankee - Servicable on Hood Roller Furling with a pole for downwind sailing Standing Rigging was new in 2005, had two years of use, and then was cleaned and put in climate controlled storage. Went back up in 2021.
Tankage
Water Tanks: Two 50 gallon, Total capacity 100 gallons Holding Tank: One 35 gallon Fuel Tank: One 90 gallon |
Location: Oriental, North Carolina
|
|
L109008

|
|
 |
Material
|
Hull
|
Type
|
Rigging
|
Cabins
|
Condition
|
fiberglass
|
monohull
|
cruiser
|
cutter
|
|
excellent
|
Return to main 38' downeast 38 Cutter thumbnail photograph page
|
|


|