35' Young Sun 35

HULL NUMBER: YSY353550981 MODEL YEAR: 1981
BUILDER: Young Sun Yacht Co. REGISTRATION #: MC 0615 LK
Ring Tung Hsien, Taiwan VESSEL NAME: Advocate II
ENGINE: Freshwater cooled, Yanmar diesel marine engine
ENGINE SERIAL #: 65402
MODEL #: 3Q30F
HOURS: unobserved
PROP: Bronze 3-blade, 3189, 460mm X 330mm RH
KANZAKI TRANSMISSION
SHAFT TYPE: Stainless steel SIZE: 31mm
HULL SHAPE: Round hourglass chine, with tumblehome and canoe stern, full keel,
encapsulated ballast, attached rudder
HULL CONSTRUCTION: Fiberglass reinforced plastic
FASTENINGS: Stainless steel
FRAMES: Fiberglass reinforced plastic, tabbed, over teak
STRINGERS: Fiberglass reinforced plastic, over wood
BULKHEADS: Plywood, Fiberglass reinforced plastic, tabbed
DECKS: Fiberglass reinforced plastic with wood core
CABINS: Molded with deck
BILGES:
No signs of water, signs of oil, dirty needs cleaning
BILGE PUMPS:
Manual, cockpit mounted Whale/Gusher pump
12 Volt Jabsco/Par 380 GPH bilge pump with auto/manual switch
BERTHS:
7 Total
2 at V-berth
3 at Main cabin, fold down settee, 2 at galley dinette
2 at Starboard quarter berth
CANVAS/VINYL COVERS:
Green canvas sail cover, good condition
Green canvas bimini and dodger with enclosure, unobserved
Stainless steel frames for dodger and bimini
CARPETING:
None, teak and holly cabin sole, good to fair condition

COCKPIT CUSHIONS:
2 Green, folding canvas, good condition
DRAPERY:
2 Personalized kits

LIFE SAVING EQUIPMENT:
4 Type II USCG approved PFDs
2 Heaving cushions
Double life lines with gates
Teak cabin top handrails
Stainless steel double rail, welded, bow pulpit
Stainless steel double rail, welded, stern pulpit

MOORING EQUIPMENT:
4 Dock lines
2 Spring lines
4 Stainless steel 9.25-inch horn cleats; 2 at bow, 2 astern, hawse pipes in
bullworks for all cleats
2 Stainless steel 9.25-inch horn spring cleats, amidships
NAVIGATION LIGHTS: LED
Meets current USCG standards, were working at time of inspection
REFRIGERATION:
Built-in, top and front load icebox
RUNNING RIGGING:
All lines, sheets and halyards necessary to properly sail this vessel
All halyard and reefing control lines lead aft to cockpit
SAILS:
Dacron mainsail
1.5 Oz asymmetrical spinnaker
Roller furling Dacron genoa with green UV leech cover
Dacron cutter

STANDING RIGGING: Inspected on horses
Aluminum mast and boom, deck stepped and painted white
Cutter rigged, with bobstay
Stainless steel wire stays and shrouds, continuous
Inner forestay and check stays
2 Roller furling headstay systems by Harken
STEERING:
Mechanical, cable, and quadrant pedestal wheel steering with wood spoke and
stainless steel hoop

THRU-HULLS:
7 Bronze, below the waterline seacocks, visually inspected, operable, double hose
clamped
2 Transducers
VENTILATION SYSTEM:
Natural only required
WATER SYSTEM:
12 Volt pressure water system by Par
110 Volt 6-gallon hot water tank
WINCHES:
2 #25 Chrome/bronze, self-tailing, Barlow, 2-speed primary cockpit sheet winches
2 #23 Chrome/bronze, self-tailing, Barlow, 2-speed cabin top winches
2 #15 Chrome/bronze, Barlow, 2-speed mast winches
ACCESSORIES:
l Chart table light Toe rail mounted genoa track
4 Deck vent Dorades Interior table
11 Opening port lights with screens Steel storage cradle
Mainsheet traveler by Schaefer Foredeck spreader light
2 Winch handles Windex
Stern rail mounted outboard motor bracket 2 Winch handle holders
Self-tacking jib track
2 Opening cabin top hatches, one doghouse
Stainless steel pedestal guard with cup holder
Stainless steel and teak boomkin
West inflatable raft
Johnson outboard, 2-hp