31'
C&C
Corvette
|
Year
|
Length
|
Beam
|
Draft
|
Location
|
Price
|
|
1971
|
31'
|
9''
|
3.2-7'
|
Nevada
|
$9,500
|
 |
| Description: |
PRICE REDUCTION!!!!!!!!!!!!!
A change of plans has stopped this professional quality refit project in its tracks. the hard work is done and she is now ready for assembly by her new owner. A custom trailer was built for this boat in 2010. Mast was completely redone by Anacortes Rigging 2012,new boom, custom stainless steel bow roller for the new Rocna 10 kg anchor,new stays.New Lewmar hatches, and Much more
PLEASE! EMAIL ONLY, IF YOU ARE GOING TO LEAVE A MESSAGE,..... LEAVE A PHONE NUMBER.THANK YOU! |
| Equipment: |
First of all , the engine was removed and discarded by the previous owner. His plan was to re power with a Beta Marine diesel engine.
I purchased the boat two years ago in the Seattle area and brought it to our dry climate in Henderson, NV. Right now it is in a boat yard one mile from Sunset Station Casino where rooms are available for less than $50 per night. So when you need to fly in and inspect the boat the logistics are easy.
All parts, from the cabin sole to the head were carefully removed and stored in a conditioned space. Most of the teak and trim are in excellent condition and labeled where necessary . All of the parts that were removed are available including winches and all ss hardware.
I have listed the " boat only" because if it does not sell , I will donate it to charity. That being said the trailer and most of the associated hardware is brand new and uninstalled which I will use on another project or sell. The complete package can be purchased for $ 10,500.As it sits there is over $40,000 invested in the project and there are files to document that .
A partial list follows;
$15,000 Boat cost in 2010
$ 8,000 Custom Trailer
$ 6,800 Mast was re manufactured and a new boom manufactured
$ 1,200 New custom ss stem-head and installed
$ 500 New Rocna 10 kg. anchor
$ 900 Two new deck hatches
$ 3,000 Custom anodized aluminum toe rails
$ 1,500 Custom SS rudder and shaft skeleton
$ 900 New SS Edison Tiller Head
$ 350 Chain plates New (3 ea) need 4 more
$ 300 New SS Cowl
$ 1,000 New Atkins and Hoyle port lights
$ 200 Beta Marine cable set for new engine
$ 100 Blue prints and plans
Sail inventory:
1 newer North main ( needs cleaning and some stitch repair)
1 Old Boston main ( worn)
1 Old Boston Genoa ( looks fair)
1 Rainbow colored Genoa ( Great Condition)
1 Old Boston Genoa (hank on -fair condition)
1 Thomas spinnaker ( Great Condition)
Hello, Thank you for your interest in the The boat.
First of all , the engine was removed and discarded by the previous owner. His plan was to re power with a Beta Marine diesel engine.
I purchased the boat two years ago in the Seattle area and brought it to our dry climate in Henderson, NV. Right now it is in a boat yard one mile from Sunset Station Casino where rooms are available for less than $50 per night. So when you need to fly in and inspect the boat the logistics are easy.
All parts, from the cabin sole to the head were carefully removed and stored in a conditioned space. Most of the teak and trim are in excellent condition and labeled where necessary . All of the parts that were removed are available including winches and all ss hardware.
I have listed the " boat only" because if it does not sell , I will donate it to charity. That being said the trailer and most of the associated hardware is brand new and uninstalled which I will use on another project or sell. The complete package can be purchased for $ 10,500.As it sits there is over $40,000 invested in the project and there are files to document that .
A partial list follows;
$15,000 Boat cost in 2010
$ 8,000 Custom Trailer
$ 6,800 Mast was re manufactur |
|
Location: Henderson, Nevada
|
|
L48187
|
|
|
|
Material
|
Hull
|
Type
|
Rigging
|
Cabins
|
Condition
|
|
fiberglass
|
monohull
|
racer/cruiser
|
cutter
|
1
|
project boat
|
|
|
|
Contact Seller
C&C 31s
Nevada C&Cs