25' Irwin 10/4

Year	Length	Beam	Draft	Location	Price
1976	25'	10.4'	2.9'	New York	$7,500

Description:

The Irwin 10/4 was designed to provide solid, stable, roomy sailing fun for the whole family - and due to the size, lots of friends as well. Very large and comfortable 25 footer. Built with a solid fiberglass hull - no core worries in the hull. The ten foot four inch wide beam and 7000 pound displacement means a very stable ride, huge cockpit, and plenty of cabin room. Lots of teak, very classy feel below. Near six foot headroom, six-foot-six v berth, bunks for five. Fully enclosed head. If you're local, it's the perfect sailboat for Oneida lake - big and stable in the chop, shallow draft with the board up for the coves or anchoring off Sylvan beach. Sail inventory: Mainsail, Genoa for the Harken roller furling. Staysail. Extra jib. All fine for cruising. Bright Blue Sail covers for the staysail (good condition) and mainsail (fair condition.) same canvas for both hatch covers. Tall mast and a bowsprit for lots of sail area. Cutter rig with self-tending staysail. Mainsheet and staysail sheet led to aft of cockpit - if you don't unfurl the genoa you can trim and helm from the last two feet of the cockpit; great for having guests on board. Double reef points in the mainsail and Harken roller furling to shorten sail easily. Standing rigging in good condition, mast is down this winter and all was inspected. Reliable Yanmar diesel inboard - well taken care of; proper oil changes, Racor filtration (set up with 2 micron) and water separator, fuel lube, biocide, the works. Was setup by a marine diesel mechanic 2010, new fuel pump 2010. Strong alternator to charge dual battery bank. 20 gallon diesel tank. Spares. Softcopy of Manual. Two anchors; CQR(Plow)anchor (great for sylvan beach sand!) in bowsprit roller above anchor rode locker. Danforth backup. Icebox-very large-accessible from cockpit and cabin. Many spares, extras, and lagniappe.

Equipment:

Since I have had her: Centerboard cable new 2010 Worn centerboard pivot bearing reglassed, redrilled true and remounted with new packing 2012 New Raymarine depth sounder/knotmeter 2010. Wheel steering - fiberglass repair of broken pedestal 2010, rebuilt wheel mount(new brass key, lube) 2011. New latches on lazarettes 2012 Marine head rebuild 2010. New bilge pump 2010 Rebuilt Whale pump - a built in hand operated bilge pump. (2010) and hoses(2012) New raw water strainer, intake hose 2010 Bottom painted 2009 For serious inquiries, I have the report available from when I had a marine survey done three years ago - and can discuss how the priority needs have been addressed since then. Needs - no showstoppers. May change as weather permits work on it this late winter. - New compass for the binnacle - Cosmetics on some of the teak (at the moment) - Cosmetics on the pedestal repair - Knotmeter/Depthsounder face unit not mounted - Two-burner stove pressure valve needs rebuilt for the stove to operate- have kit - Starboard forward running light mount needs to be rewelded to pulpit - Several small leaks into the cabin patched - need to make sure I got them before victory can be claimed. - One interior cushion missing (at the moment, needs new foam. See "small cabin leaks" above...) - New electrical connector at mast step needs attached and hooked up - Needs anchor light if you want to anchor out overnight. - Random small cosmetics Other info - 110v power system present. Have not used; understood from the previous owner that it worked nicely. - Refrigeration system in the icebox. Have not used. Asking $7500, but given the wide values seen on these, is negotiable. Is priced well below the assessed value of $10,900 for an Irwin 10/4 in "Average" condition, due to Needs section above.

Location: Oneida Lake, New York

L34409

(315) 383-3842 Contact Seller

Material	Hull	Type	Rigging	Cabins	Condition
fiberglass	monohull	cruiser	cutter	1	good