Equipment: |
Rigging/Hardware: -All Lines run aft to cockpit -Cruising quality mainsail w/ 1 reef point -110% jib recut for furling system and sunbrella uv protection added by North Sail -CDI Flex Furler 2 system -All rigging inspected, backstay modified to be adjustable -BoomKicker boom support -Harken hardware throughout -Spinlock Deck clutches x4 -Quick service winches -Adjustable jib car tracks -Hi-tech low stretch lines/running rigging -Tiller Clutch -Composite tiller extension -WEST system wood/laminate tiller Mechanical: -2019 Yamaha four stroke 6 HP long shaft outboard with my guess about 10 hours on it -Fully serviced this summer (engine oil, lower unit oil, spark plug) Electrical: -Hummingbird Helix 5 G2 chart plotter/depth sounder -110v Shore power -On board smart house battery charger -90 amp/hr house battery -LED lights through boat -Updated switch panel with battery monitor -AM/FM/CD stereo -Battery Kill Switch -Updated Blue Seas fuse panel -12v fan -Automatic Bilge pump Hull: -Stainless steel folding swim ladder -Fresh VC17 bottom paint this summer -Full refit of rudder blade (2026) including fairing, finishing, and polishing with VC performance epoxy -Centerboard was also refit (2026)the same then applied VC17 to board and inside trunk. Also replaced the pedant line, and Delrin centerboard pivot. -All deck teak has been removed and replaced (2026) with custom synthetic/poly teak, meaning no more bright work maintenance -Cabin top hardware and window fasteners also removed and rebeded with fresh sealant (2026) -Forward hatch was refurbished with new lens and rebeded (2026) -Simplified cabin layout -Changed mast compression post load path from the cabin sole, directly to the keel -Rebuilt bulkheads at the chainplates with proper marine grade plywood that has been sealed from any future moisture using WEST system method. -Structural areas of the balsa core around the shroud chainplates was removed and replace with solid fiberglass (G10) -Cushions and cushion covers in nice shape -Replaced plastic thru hulls with stainless steel fittings Misc/Also Included in Sale: -New custom mainsail cover (2025) -Forspar whisker pole -Required safety equipment (life jackets, flares, fire extinguisher, throwable PFD , emergency paddle) -Dock fenders x3 -Color matched dock line x4 -Anchor, chain, and rode, with bag -Boom sun shade/tent -Lots of extra line/running rigging -Some spare parts -Cartridge style porta potty (never used) -A set of varnished wood hatch board and a set of screen hatch boards and screen for the companion way hatch (very nice in the summer when sleeping on board) -Custom made fitted sheet for the v-berth Trailer: -Unknown brand -Roller bunks with quick adjustable keel support -Single axle w/ leaf springs -Newer tires -Never used full size spare -2 in ball -Lights work as should w/ 4 pin harness -Custom mast cradle for when towing -Could use a fresh coat of paint overwise in fine condition. We have regularly taken it on long multi hour trips. Including to the UP of Michigan. If you are new to sailing I am willing to include some lessons or include a course/membership at Saginaw Bay Community Sailing Association with the sale of the boat. The pervious owner did this for me and I am willing to pay that forward for someone who is looking to get into the sport. *Note I had the outboard off the boat to do its annual service while taking the pictures. I will add/update picture with the outboard when able |