Equipment: |
This is an extensive list of equipment and upgrades onboard Avalon :
Engine, Bow thruster, Tender, outboard Engine:
Volvo Penta TMD 22 turbo 80HP Consumption 3 liters/0.8 gallon per hour at 6 knots or 6 liters/1.5 gallons at 8 knots. In perfect working order. Fuel tank 250 liters Last Service January 2023 Retractable bow thruster (creates no drag when sailing), hull attachment piece changed from corroded aluminum to custom made carbon fiber. The two electrical linear actuators (2021) Tender : Zodiac Cadet 350 aluminum flooring (3.50m / 11.5 ft, 67kg) (2021) Outboard Engine : Yamaha F15MSH very few hours, very good condition as it used to be a spare outboard on a superyacht tender. (2005)
Sails and Rigging :
Rigging 7/8th, higher mast, 3 spreaders, rod cable all in good state Harken furler all in good state Inner detachable forestay in dyneema (2021) Hydraulic backstay, all joints and oil changed (2021) Full Batten Mainsail from Rolly Tasker, offshore Fastnet Name of the Fabric is Challenge fastnet Dacron high density, doubling of the leech and foot, quadruple stitching. 3 reefs on low friction ring. Sail made for demanding blue water cruising (2021) Genoa from Rolly Task, Tri radial cut, fabric is Challenge fastnet Dacron high density, offshore reinforced. (2021) Large Staysail on inner forestay (33m2) from Incidence, Tri radial cut, fabric is hydranet dyneema, extremely solid and keeps a great shape (2020) Small Staysail on inner forestay (22m2), Cross cut, fabric is a hybride hydranet/ high performance dacron Storm Jib on inner forestay (9m2) from Micro Sailing, cross cut, fabric is heavy duty Dacron (2020) Lazy Bag and Lazy jacks are in very good state (2019) Sun shade attached to lazy bag, easy roll up and down system, very good shape (2019) Double Headsail Track which allows for use of Genoa and Staysail at the same time Full carbon painted in white Spinnaker Pole Bowsprit in Marine Stainless Steel and dyneema bobstay
Anchoring :
Anchor 27kg / 60lbs Ultramarine marine stainless steel 316l, best anchor on the market, will not rust, value 3000Euros (2023) 60 m / 200 ft of 12mm / 1/2inch galvanised steel chain from Uship (2021) Windlass Lofran Tigre 12V 1500W (2021) Secondary anchor 25kg / 55lbs Danforth chain 10mm 15m galvanised steel
Deck, Cockpit, and Hull :
Teak deck changed, approximately 1500 old screw holes filled with epoxy, new deck in synthetic teak deck, fully glued without any screws Brand : sundec eteak (50% plastic and 50% natural fibres) (2022) Cockpit teak deck in real exotic wood, very good state (2019) Double Carbon wheels Carbonica, custom made lowered and extended aft cockpit (2019) Hard dodger fully made in carbon fibre, very resistant (can climb on it) yet very light, plexiglass, neon led lighting and sound speakers integrated. Very good visibility, truly waterproof, and great for doing night watches protected, warm and dry below it, on a sit with the smartphone controlling the autopilot ! It also has an opening hatch on the top for visibility to the mainsail as well as to get some ventilation when needed. It was made after the old one in fabric broke down after a big hit from a wave, wont happen with this one! (2023) Marine Stainless steel arch with heavy duty big diameter tubes, all this made extra strong in order to carry 4 big solar panels Contact me for the complete inventory |